Product Details:
|
Test Condition: | Temperature:20℃~25℃;humidity:35~55% | Battery: | 9V Square Carbon-zinc Or Alkaline Battery |
---|---|---|---|
StudScan Mode: | 19mm(maximum Depth) | ThickScan Mode: | 28.5mm (maximum Detection Depth) |
Live AC Wires(120V 60Hz/220V 50Hz): | 50mm(max) | Operating Temperature: | -7℃~49℃ |
Storage Temperature: | -20℃~66℃ | Waterproof: | No, But Splash Resistant |
Highlight: | OEM AC Live Wire Detector,PQWT AC Live Wire Detector,Multifunction Magnetic Stud Finder |
OEM Customized Multi-Function Metal And AC Live Wire Detector Magnetic Stud Center Finder
Product Description
PQWT-QT28 cannot scan the following materials:
Carpets, tiles, metal walls, cement wall.
Detecting wood stud and live wire:
1) Grip the handheld areas, position it straight up and down and flat against the wall.
Note 1: Avoid griping over the finger stop, hold the device parallel to the studs. Keep the device flat against the surface, do not press it hard and do not rock and tilt. When moving the detector, holding position must stay unchanged, or else the detection result will be affected.
Note 2: Move the detector flat against the wall, the moving speed shall stay constant, otherwise the detection result may be inaccurate.
2) Selecting the detection mode: move switch to left for StudScan (Figure 3) and right for ThickScan (Figure 4).
Note: Select the detection mode according to different wall thickness. For example, select StudScan mode when the thickness of the dry wall is less than 20mm, select ThickScan mode when it is greaterthan 20mm.
Contact Person: Mamie Ren
Tel: +8618817121511